Course catalogue

Who is this course for?

Personnel requiring an awarneess or understanding of hydraulic systems.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to introduce learners to the different types of hydraulic systems.

How will this course benefit my company?

To ensure a minimum company understanding of different types of hydraulic systems found in the Oil and Gas Industry.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%. 

The VIRSEC Maritime English Test for Senior Deck Officers is designed to assist ship operators and employers make recruiting decisions by assessing the English language competency of Seafarers at a Senior Officer position working on board any vessel.

The Test is designed around the approved guidelines for Maritime English developed by the IMO. These guidelines are combined with internationally recognised methods for English language testing to form a rigorous and accurate testing system.

Regulations:

The English Tests are designed from the ground up using approved guidelines from the International Maritime Organisation (IMO Model English course 3.17); IMO Standard Marine Communication Phrases (SMCPs); and consistent with the framework set out by the Standards of Training, Certification and Watchkeeping.

Why Take This Test With VIRSEC:

What makes VIRSEC different from the others? Below are some of the benefits of taking this online Test with VIRSEC:

• CPD Accreditated Online Test
• Randomised Questioning
• Adheres to International Standards
• Position-Focused Questions
• Assesses 5 Primary Language Skills

Test Duration:

The user must attempt the Test in 90 minutes, and in one sitting. If a candidate does not complete the exam within the duration, they will fail any unanswered questions.

Who is this course for?
All well intervention personnel working with tools where explosives are an integrated part of the operation

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to give learners an introduction to explosives used in well intervention operations

How will this course benefit my company?
By ensuring you have an introduction to explosives used in well intervention operations

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

This eLearning course is aimed at individuals who work offshore, in any role, anywhere in the world.

Is previous experience required?

The course is designed for existing workers in the oil and gas industry. Completion of this course awards an IMIST certificate valid for four years, after which you will need to sit the course again to refresh your knowledge and earn a new certificate.

How will the course benefit me?

The offshore working environment is home to many hazards, which means that it is vital for everyone who goes offshore to have the same baseline level of safety knowledge. This course has been created with OPITO to set a global safety standard by applying a consistent level of safety awareness across nine safety critical areas and is applicable.

The knowledge gained in this course will help you to stay safe in your day-to-day activities offshore. It will also outline some of the systems and procedures in place to manage everyday operations offshore.

How will the course benefit my company?

By ensuring that your safety knowledge is at or above the baseline level, your company can rest assured that you are able to work offshore safety and in compliance with regulations and company procedures. Increased safety knowledge helps to prevent incidents and makes your working environment a safer place.

What standards are referenced in the course?

This course is written based on the OPITO standard International Minimum Industry Safety Training Standard (IMIST) (5312). As a global standard, the course is not written to meet any specific regional legislation but references industry best practices and standard operating procedures throughout.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 100%. 

The course starts with an optional pre-assessment that checks your existing knowledge of the course topics. The course will restructure so that it only contains the content needed to address the gaps in your knowledge.

Please find pre-course information and learning outcomes here: 

https://mintra.com/implementing-maintaining-opito-standards-policy

Who is this course for?

Personnel requiring awareness and understanding of Natural Gas & LNG and associated HSE considerations.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to improve your knowledge of Natural Gas Liquid and LNG including transport and HSE considerations.

This course contains nine modules:

Module 1: An Overview of Gas Liquids

Module 2: Chemical and Physical Properties of Gas Liquids

Module 3: Liquefied Petroleum Gas

Module 4: Natural Gas Liquids (NGL) Recovery

Module 5: Removal of Natural Gas Impurities

Module 6: Liquefaction of Natural Gas

Module 7: Shore-Based Storage of Gas Liquids

Module 8: Transportation of Liquefied Natural Gas

Module 9: Health, Safety and Environmental (HSE) Issues of Gas Liquids

How will this course benefit my company?

To ensure you have an understanding of NLG, LNG, transportation and HSE considerations.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice. 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

Personnel who are required to work with Piping and Instrumentation Diagrams

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will enable you to describe the information provided in a P&ID and explain why this information is useful.

How will the course benefit my company?

Personnel who are able read and understand the information provided in P&IDs are better able to troubleshoot system problems.

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 100%.

Who is this course for?

Personnel requiring an awareness and understanding of the common ways rigging equipment is used.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to give an overview of the safe use of rigging equipment.

How will this course benefit my company?

By ensuring you have an overview of the safe use of rigging equipment.

What standards are referred to in this course?

The Lifting Operations and Lifting Equipment Regulations (LOLER) 1998

The Provision and Use of Work Equipment Regulations (PUWER) 1998

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel requiring an awareness or understanding of sealed sources of radiation in the US.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to ensure that relevant personnel in the US have a common and consistent understanding of sealed radiation sources.

How will this course benefit my company?

By ensuring you have a common and consistent approach to company and industry best practice in relation to US operations involving sealed radiation sources.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel who require a basic understanding of the operation of diesel engines and the importance of maintaining good lubrication for their safe operation.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course will provide you with an overview of how diesel engines operate, their components and their use within the industry. It will also outline the importance of maintaining good lubrication for their safe operation.

How will this course benefit my company?

This course will provide personnel with an overview of how diesel engines operate and the importance of maintaining good lubrication for their safe operation.

What standards are referred to in this course?

This course does not refer to specific legislation or standards.

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

The VIRSEC Maritime English Test for Senior Engine Officers is designed to assist ship operators and employers make recruiting decisions by assessing the English language competency of Seafarers at a Senior Officer position working on board any vessel.

The Test is designed around the approved guidelines for Maritime English developed by the IMO. These guidelines are combined with internationally recognised methods for English language testing to form a rigorous and accurate testing system.

Regulations:

The English Tests are designed from the ground up using approved guidelines from the International Maritime Organisation (IMO Model English course 3.17); IMO Standard Marine Communication Phrases (SMCPs); and consistent with the framework set out by the Standards of Training, Certification and Watchkeeping.

Why Take This Test With VIRSEC:

What makes VIRSEC different from the others? Below are some of the benefits of taking this online Test with VIRSEC:

• CPD Accredited Online Test
• Randomised Questioning
• Adheres to International Standards
• Position-Focused Questions
• Assesses 5 Primary Language Skills

Test Duration:

The user must attempt the Test in 90 minutes, and in one sitting. If a candidate does not complete the exam within the duration, they will fail any unanswered questions.

Presentation

This training course provides a general introduction to the corrosion process, the protective coating used to prevent corrosion, the coating process and coating inspection.

Objectives

On completion of the training, students will be able to:

Know the different types of corrosion and their causes.

Understand the corrosion phenomenon and the threat it represents to the structural integrity.

Know the protective coating systems used in shipbuilding.

Be familiar with the constituents, structure and curing prerequisites of the protective coating systems.

Understand the different phases of the coating process and the requirements for successful coating application.

Be familiar with coating inspection procedures and the requirements of the IMO PSPC.

Recognise the different forms of coating failure.

Program

Module 1 - Introduction to Corrosion and Protective Coatings

Corrosion definition

Causes of corrosion

Different forms of corrosion

Corrosion rate

Protective coating systems

Paint coating components

Types of coatings

Technical data sheets

Coating cure

Module 2 - Coating Process and Inspection

Coating process scheme

Surface preparation

Cleaning techniques

Surface preparation

Paint application

Coating durability requirements

Coating inspection

Coating system documentation

Coating inspector qualifications

Inspection procedures and plan

Coating defects

Certificate

On completion of the training program, the student will be awarded the following qualifications:

Certificate of Corrosion and Coating awarded by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Corrosion and Coating, issued by Bureau Veritas Solutions Marine & Offshore, is obtained after completing the course and passing the qualification examination.

Presentation

This training course is about what an effective cyber security risk management should be. Its goal is not to address too many technical questions as the best technical expertise in the world won’t guarantee zero cyber risk. The course aims at providing your Company with a real battle plan: know the assets, know the enemies, organize accordingly and train the effectives. Although this will not be enough to avoid a cyber incident, the severity of the consequences of a cyber incident will depend on the company’s preparedness and ability to manage it.

Who the course is for?

The course ISM Code and Cyber Risk Management is aimed at anyone interested in understanding how an effective cyber security risk management should be. This may include Top Management of Shipping Companies, Ship Managers, Technical Superintendents, Ship Masters, Officers and Seafarers; Offshore Units Operators and Technical Staff, Shipyards Technical Staff; Surveyors; P&I and/or Insurance Inspectors; etc.

Objectives

On completion of the training, students will be able to:

Know what cyber security is, the main threats and their consequences.

Understand how to consider the cyber risks in the Safety Management System and how the ISM Code translated into cyber security.

Know the 12 cybersecurity commandments that will help implementing an efficient cyber risk management system.

Who is this course for?
All relevant personnel.

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to provide personnel with an overview of how the Working Time Regulations impact on their working hours and the importance of effectively managing and assess the risks posed by fatigue in the workplace.

How will this course benefit my company?
By ensuring you have an overview of how the Working Time Regulations impact on their working hours and the importance of effectively managing and assess the risks posed by fatigue in the workplace.

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

This course is aimed at all personnel involved in operations involving the use of seals, particularly those who are expected to undertake related duties in the workplace.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will this course benefit me?

This course aims to provide an overview of the role and application of seals and gaskets.

How will this course benefit my company?

To ensure you have an overview of the role and application of seals and gaskets.

What standards are referred to in this course?

The course is made according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

Officers and Crew.

Is previous experience required?

No, but basic maritime engineering knowledge is recommended.

How will the course benefit me?

This course is designed to provide you an understanding of the operation and use of an exhaust gas cleaning system (Scrubbers).

How will the course benefit my company?

The course will provide the learners with basic knowledge about scrubbers and scrubber operations.

What standards are referenced in the course?

• MARPOL Annex VI

• OCIMF guide for Implementation of Sulphur Oxide Exhaust Gas Cleaning Systems

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

The course covers the following topics:

- Agreement on Inclusive Working Conditions
- Working environment and prevention
- Absence

At the beginning of the course you can take a pre-test, where you get the opportunity to show your skills. If you pass the pre-test, you do not have to go through the entire course.

Who is this course for?
Process Operators

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to provide awareness of how gas hydrates may be formed and the effects that they can have on pipeline flow assurance. The course examines what hydrates are, how they are formed and their molecular structure. It discusses flow assurance, details the risks of pipeline plugging by hydrates, and outlines the various methods of controlling hydrate formation.

How will this course benefit my company?
By ensuring you are aware of how gas hydrates may be formed and the effects that they can have on pipeline flow assurance.

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?
Process Operators and Lab Technicians

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to provide an overview of the various types of process chemicals, their use and how they work.

Section 1: Basic Introduction to Chemistry
Section 2: Process Chemicals in the Oil and Gas Industry
Section 3: Identifying the Risks in the Use of Process Chemicals
Section 4: Managing Chemical usage

How will this course benefit my company?
By ensuring you have an overview of the various types of process chemicals, their use and how they work.

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?
All engineering sub-disciplines connected with internal flow in production systems, including Base Management.

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will this course benefit me?
This course aims to provide an awareness of the how phase behaviour and multiphase flow regimes can impact on hydrocarbon delivery.

How will this course benefit my company?
By ensuring you are aware of the how phase behaviour and multiphase flow regimes can impact on hydrocarbon delivery.

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

All personnel who are involved in offshore drilling.

Is previous experience required?

No previous experience is required to complete this course. 

How will this course benefit me?

This course aims to provide an overview of well control and the systems used in the process and is based upon the International Well Control Forum (IWCF) Level 1 Syllabus.

How will this course benefit my company?

This course will benefit companies by ensuring personnel have an understanding of well control and the relevant systems.

What standards are referred to in this course?

No standards or regulations are referenced in this course.

Is there an assessment?

Yes