Renewables

Course catalogue

hits
164
Course code: DP-2264
Course type: E-learning course
Duration: Not set
Language: Norsk
Price: NOK 450,-

E-læringskurset gir deg en opplevelsesrik og praktisk opplæring i presentasjonsprogrammet PowerPoint 2016. En kombinasjon av videoer, teori, oppskrifter, oppgaver og tester gjør det enkelt å lære seg de nye funksjonene og verktøyene. En komplett e-læring med både grunnleggende og videregående emner. E-læringskurset inneholder 82 opplæringsvideoer.

E-læringskurset er tilpasset Office 365.

Testene i e-læringskurset måler kunnskap før, under og etter opplæringen. Når ettertesten er bestått får du tilgang til et kursbevis i PDF-format som enkelt kan lagres eller skrives ut.

 

Innhold:

- Før du starter

- Utforming

- Tekst

- Bilder

- Figurer

- SmartArt-grafikk

- Diagram

- Tabeller

- Medier

- Framvisning

Forklift with practical training - Module 1.1, 2.2, 3.2, 4.2 and practical ...

Course code: KOL-009
Course type: Classroom course
Duration: 42 hours
Language: Norwegian
Price: Not set

Hensikten med opplæringen er å gi truckførere allsidig praktisk opplæring og øvelse i sikker bruk av truck, slik at ulykker i forbindelse med bruken unngås. Opplæringen skal gi fører så gode kjøreferdigheter at vedkommende selvstendig på en sikker måte skal kunne gjennomføre oppdrag med truck.

Truckfører må imidlertid gjennomføre typeopplæring på den trucken som til enhver tid benyttes i tillegg til sertifisert sikkerhetsopplæring. Opplæringen avsluttes med en praktisk prøve som innbefatter kontroll og bruk av aktuelle trucker.

Bestått praktisk prøve på aktuelle trucker vil være grunnlag for utstedelse av kompetansebevis for fører av truck

Modul 1.1 (8 timer) Arbeidsmiljø, ansvar og konsekvenser

Modul 2.2 (14 timer) Truck 

Modul 3.2 (6 timer) Praktisk bruk

Modul 4.2 Bedriftsoppl. - 20 timer Oppl.virksomhet-14 timer

 

The course is only available in Norwegian.

 

Enkle løfteinnretninger. Modul P-2.4

Course code: KOL-013
Course type: Classroom course
Duration: 2 days / 16 hours
Language: Norwegian
Price: Not set

Hensikten med kurset er å gi blivende riggere en god teoretisk grunnopplæring i sikker bruk av: Fallsikringsutstyr og enkle løfteinnretninger (enkle travers- og søylesvingkraner, håndtaljer, luft- og eltaljer og transportable vinsjer.Opplæringen gir kandidaten god innsikt i prinsippene for fallsikringsutstyrs, enkle løfteinnretningers og transportable vinsjers konstruksjon, virkemåte, bruk og vedlikehold, slik at uhell og ulykker i forbindelse med riggeoperasjoner unngås.

Deltakeren må ha fullført G11 stroppekurs før kursstart.

Opplæringen dekker den nødvendige teoretiske som er nødvendig for å kunne gjennomføre det praktiske riggekurset, Modul O 3.2.

Kurset avsluttes med en teoretisk prøve. 


Kursinnhold
- Fallsikringsutstyr
- Travers- og søyle- svingkraner
- Håndtaljer, luft- og el-taljer
- Transportable vinsjer
- Avsluttende teoretisk prøve

This course is only available in Norwegian.

Blended learning Exi Basic

Course code: EXT-008
Course type: Blended course
Duration: 5-hour e-learning + ...
Language: Norwegian
Price: Not set

This course combines self-study by e-learning and classroom training with demonstrations and examples which is useful when working in explosive atmospheres.

The concept intrinsic safety is unlike the other Ex protection concepts as it is a system concept. Therefore, it is necessary to understand the system as a whole, how the environment and individual components affect the system to maintain the integrity of the intrinsically safe system.

Course code: AST-004
Course type: E-learning course
Duration: 500 hours
Language: English
Price: GBP 1995,-

This course is taken externally on the Astutis platform, the delegate will receive a separate email from the provider with access details once this is processed by Astutis.

The enrolment will then be marked complete in Trainingportal once the course is passed.


Provided in association with Astutis, NEBOSH Learning Partner 807.

The NEBOSH International Diploma in Occupational Health and Safety is an advanced health and safety qualification. Equivalent to an undergraduate degree in OHS. The NEBOSH Diploma is NEBOSH's flagship qualification. It is recognised by employers and professional bodies in over 180 countries around the world!

The qualification will develop competence in all areas of health and safety so you can reduce risk in dangerous environments and keep people safe. It is the ideal course if you want a successful, long-term career in health and safety.

Unit A: Managing Health and Safety

This unit provides an in-depth understanding of the key areas for managing health and safety, covering moral, economic and societal drivers, health & safety law and health & safety management systems. 

A1-Principles of health & safety management, A2-Principles of health & safety law, A3-Criminal Law, A4-Civil Law, A5-Loss causation and incident, investigation, A6-Measuring and reviewing health and safety, A7-Identifying hazards, assessing and evaluating risk, A8-Risk control, A9-Organisational factors, A10-Human factors, A11-The role of health & safety practitioner

Unit B: Hazardous Agents in the Workplace

Unit B details all major aspects of managing chemical, biological, physical and physiological hazards in the workplace.

B1-Managing Occupational Health, B2-Identification, assessment & evaluation of hazardous substances, B3-Control of hazardous substances, B4-Monitoring and measuring, B5-Biological agents, B6-Physical agents - noise and vibration
B7-Physical agents - radiation, B8-Mental ill-health & dealing with violence & aggression at work, B9-Musculoskeletal risks and controls, B10-Work environment risks and controls

Unit C: Workplace and Work Equipment Safety

Unit C provides a thorough understanding of how to create and manage safe working environments, covering welfare, fire, dangerous substances, work equipment, electricity, construction and transport. 

C1-Workplace welfare requirements and specific workplace issues, C2-Fire and explosion, C3-Workplace fire risk assessment, C4-Storage, handling and processing of dangerous substances, C5-Work equipment (general), C6-Work equipment (workplace machinery), C7-Mobile, lifting, access and work at height equipment, C8-Electrical safety, C9-Construction & works of a temporary nature - hazards and controls, C10-Workplace transport and driving for work

Course code: DP-2227
Course type: E-learning course
Duration: 4 hours
Language: Norwegian
Price: NOK 295,-

This course is only available in Norwegian.

E-læringskurset viser aktuelle funksjoner og muligheter i kommunikasjons­programmet Lync 2013. En kombinasjon av videoer, teori og oppskrifter gjør det enkelt å lære seg å kommunisere og samarbeide interaktivt med kolleger og andre kontakter. E-læringskurset inneholder 35 opplæringsvideoer.

Course code: WEC-006
Course type: Classroom course
Duration: 24 hours
Language: Norwegian
Price: From NOK 5660,-

Hovedmålet med kurset er at den som gis opplæring tilegner seg tilstrekkelige kunnskaper om sikker bruk av løfteredskap slik at ulykker ved bruk unngås.

Regelverksreferanse:

Modul 1 - 2.3

Course code: WEC-008
Course type: Classroom course
Duration: Not set
Language: Not set
Price: From NOK 7340,-
Course code: GWO-001
Course type: Classroom course
Duration: 4 hours
Language: Norwegian
Price: From NOK 1900,-

Upon completion of the Global Wind Organization (GWO) Basic Safety Training (BST), delegates will have awareness of the dangers that arise when working in the wind industry and how to control and reduce these dangers.

The course participants will gain the knowledge and skills to handle manual lifting properly and ensure their own safety with proper lifting in accordance with ergonomics.

The aim of this module is to encourage positive manual handling behavior and train delegates ability to perform manual handling tasks in a safe manner in the wind turbine industry / environment.

The course covers the requirements for training of personnel and refresher courses both onshore and offshore wind in accordance with:

 

- Global Wind Organization (GWO)

- Labor Inspection (Regulations)

 

Competence for "Manual handling" must be maintained in accordance with guideline in the GWO standard. It shall be conducted refresher training every 2 years.

Course code: STQ-005
Course type: Classroom course
Duration: 1 day
Language: Norwegian
Price: From NOK 6800,-

Objective: The course gives personnel a good theoretical and practical basic training in casting the socket according to EN 13411-4


The course gives personnel a good theoretical and practical basic training in casting the socket according to EN 13411-4. The training is for personnel who in their daily work will use or use steel ropes. This can be deck personnel, sailors, drilling personnel, crane operators or inspectors.

The course lasts 1 day (8 hours).


Content:

- Introduction
- Regulations
- Steel rope
- Sockets casting theory according to standard EN-13411-4
- Protective measures during casting
- Practical casting
- Cutting of steel ropes
- Preparation
- Cleaning
- Casting
- Control
- Exam

Course code: DP-2247
Course type: E-learning course
Duration: 7 hours
Language: Norwegian
Price: NOK 450,-

E-læringskurset gir deg en opplevelsesrik og praktisk opplæring i Word 2013. En kombinasjon av videoer, teori, oppskrifter, oppgaver og tester gjør det enkelt å lære seg de nye funksjonene. En komplett e-læring med både grunnleggende og videregående emner. E-læringskurset inneholder 64 opplæringsvideoer.

 

Kursinnhold

- Redigering

- Formatering
- Sideformatering
- Språkverktøy
- Tabeller
- Illustrasjoner
- Maler og skjema
Course code: APP-014
Course type: E-learning course
Duration: 90 Minutes
Language: English
Price: NOK 1390,-

The course is for performing personnel whose work may affect the safety of electrical installations through the use of possible ignition sources.

The course is in accordance with EN IEC 60079-14, NEK 420, the Petroleum Act, the ATEX Directive.

Course code: EXT-011
Course type: Classroom course
Duration: 1 day
Language: Norwegian
Price: From NOK 6000,-

This is a course for electrical installations in potentially explosive areas.

Our goal is to make sure that employees are motivated to work safely and securely.

 

Topics:

• Understand the general principles of type of specific protection and correct labeling of components approved in intrinsically safe facility (IS)

• Current Exi Standard

• Could choose to install the correct Exi equipment in hazardous areas accordance with IEC 60079-14 standards and 60079-25

• How to work safely with IS

• Requirements for competence to perform work on Exi installations

• How to verify and calculate an Exi circuit

 

Standards:

• NEK EN 60079-11

• NEK EN 60079-14

• NEK EN 60079-25

• IEC 60079-11

• IEC 60079-14

• IEC 60079-25

 

This course is only available in Norwegian.

Course code: STQ-007
Course type: Classroom course
Duration: 3 days
Language: Norwegian / English
Price: From NOK 5490,-

Objective: The purpose of the training is to provide crane operators, banksman / signalers with good general basic training in the safe use of lifting equipment, so that accidents and incidents in connection with use are avoided.


The authorities set requirements for basic safety certification of persons who are to drive forklifts, mass transfer machines and cranes. The requirements include both theoretical and practical training. To complete the common theory, one must take and pass a theoretical exam.

The G11 Lifting equipment Module 2.3 course gives you who will work with lifting equipment knowledge about safety, daily control and maintenance as well as disposal rules for various lifting equipment. We want to give you a conscious attitude to the dangers that can arise and how to avoid them. Our G11 course is led by instructors with great competence and practical experience from the use of lifting equipment.

Module 1.1 Working environment, responsibilities and consequences are common to machine, forklift and crane. If you can document that you have module 1.1 from before that is not older than 3 years, you can start right on module 2.3.


Contents Module 1.1

- Laws and regulations
- Working environment, responsibilities and consequences
- Environmental
- Safety regulations
- Dangerous goods, marking and handling

Contents Module 2.3

- Laws and regulations
- Work equipment and accessories
- Construction and operation
- Lifting gear
- Control and inspection
- Cargo handling
- Work environment
- Dangerous cargo
- Final theoretical test

Course code: AST-006
Course type: E-learning course
Duration: 40 hours
Language: English
Price: GBP 675,-

This course is taken externally on the Astutis platform, the delegate will receive a separate email from the provider with access details once this is processed by Astutis.

The enrolment will then be marked complete in Trainingportal once the course is passed.

 

The IEMA Foundation course provides staff with a solid knowledge of the environment, sustainability, and governance principles relevant to organizations.  It covers specific management tools and skills with a practical application for the workplace to enable staff to improve performance.

 

Develop the knowledge and skills to help improve sustainability and environmental performance

Learn practical skills to help reduce the impacts of the organization on the environment

 

Upon completion of this course, learners will be able to:

 

• Understand business, governance, and environmental principles and their relationship with organizations, products, and services

• Ensure compliance with major environmental policy and legislation 

• Implement specific tools, techniques, systems, and practices to improve sustainability performance

• Collect data, perform analysis and evaluate information to provide sustainable solutions

• Implement change and transformation to improve sustainability

 

Course code: DP-2266
Course type: E-learning course
Duration: Not set
Language: Norsk
Price: NOK 450,-

E-læringskurset gir deg en opplevelsesrik og praktisk opplæring i e-postprogrammet Outlook 2016. En kombinasjon av videoer, teori, oppskrifter, oppgaver og tester gjør det enkelt å lære seg de nye funksjonene og verktøyene. E-læringskurset inneholder 46 opplæringsvideoer.

E-læringskurset er tilpasset Office 365.

Testene i e-læringskurset måler kunnskap før, under og etter opplæringen. Når ettertesten er bestått får du tilgang til et kursbevis i PDF-format som enkelt kan lagres eller skrives ut.

 

Innhold:

- Før du starter

- Sending av meldinger

- Behandling av meldinger

- Kalender

- Personer

- Oppgaver og notater

Course code: GWO-002
Course type: Classroom course
Duration: 16 hours
Language: Norwegian
Price: From NOK 7920,-

Upon completion of the Global Wind Organization (GWO) Basic Safety Training (BST), delegates will have awareness of the dangers that arise when working in the wind industry and how to control and reduce these dangers.

 

The course covers the requirements for training of personnel and refresher courses both onshore and offshore wind in accordance with:

 

- Global Wind Organization (GWO)

- Labor Inspection (Regulations)

 

Competence for "Working at heights" must be maintained in accordance with. guideline in the GWO standard. It shall be conducted refresher training every 2 years.

Anleggsmaskin - Modul 1.1, 2.1 og 3.1

Course code: KOL-016
Course type: Classroom course
Duration: 40 hours
Language: Norwegian
Price: Not set

Kurset starter med fellesteori som er en grunnleggende innføring i aktuelle lover og forskrifter og en grunnleggende innføring i sikker bruk av arbeidsutstyr. Fagdelen vil gi eleven en god teoretisk grunnopplæring i sikker bruk av masseforflyttingsmaskiner samt en god innsikt i oppbygging, virkemåte, vedlikehold og bruk.

Eleven skal gjennomføre teorimodul 1.1 (8 timer), modul 2.1 (24 timer) og  3.1 (8 timer). Dette skal gi førerne en god generell grunnopplæring i sikker bruk og praktisk forståelse for prinsippene for masseforflytningsmaskiner.

Kurset gjennomføres over 5 dager, og avsluttes med en teoretisk prøve.

Etter bestått teoretisk prøve og gjennomført grunnleggende praktisk bruk modul 3.1 + praksiskjøring 32 timer, kan praktisk prøve gjennomføres. Bestått praktisk prøve vil være grunnlag for utstedelse av kompetansebevis for fører av masseforflyttingsmaskin i valgt klasse.

 

Kursinnhold

- Konstruksjon

- Oppbygging

- Betjening

- Bruksegenskaper

- Bruksområder

- Sikkerhetsutstyr

- Viktige kontrollpunkter

- Vedlikehold


This course in only available in Norwegian.

Course code: WEC-012
Course type: Classroom course
Duration: 40 hours
Language: Norwegian
Price: From NOK 10910,-

Hovedmålet med kurset er at den som gis opplæring tilegner seg tilstrekkelige kunnskaper om sikker bruk av traverskraner, slik at ulykker ved bruk unngås.

Regelverksreferanse:

Modul 2.7 - 3.7 - 4.7

Course code: RVT-951
Course type: E-learning course
Duration: 60 minutes
Language: English (US)
Price: GBP 30,-

The modern workplace is often thought of as a strictly professional, rational, logical environment. Cooperation is key--personal opinions and emotions must be put aside in the name of teamwork, which may be easier said than done! No one can expect to connect with fellow colleagues the way they do their own friends or family members. One crossed word or bad mood can damage corporate relations, sometimes irreparably. The uncertainty of the business environment of today, and resulting stress that follows only adds to the pressure workers feel in performing their level best. Feeling overworked and overwhelmed is natural in the workplace, especially when it comes to dealing with change.   The purpose of this course is to illustrate ways you can overcome the emotional barriers you may face in the workplace. This course will guide you through various exercises and give you tips to help you manage your emotions at work so you can perform to the best of your abilities.

Hits per page
| 1 ... 7 |