Course catalogue

Who is this course for?

Everyone working on low voltage installations.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?

The course meets the requirements set in § 7 of the "Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE", that relevant personnel shall be given annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardio-pulmonary resuscitation (CPR).

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in.

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

How will this course benefit my company?

By ensuring you have the knowledge and competence to be working on low voltage installations.

What standards are referred to in this course?

§ 7 of the "Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE".

Is there an assessment?

The fast track version of the FSE course starts with a pre-test which checks the participant's knowledge of FSE. Depending on the answers given, the participant will get a course that is tailored to the level of knowledge revealed in the pre-test. The fast track version of the course is suitable for all but is particularly practical for those undertaking refresher training in FSE. 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

Any officer of the watch looking for an easy-to-follow supplement or refresher to the IMO generic course (IMO Model Course 1.27) and anyone requiring knowledge of the general features of ECDIS.

Is previous experience required?

No previous experience is required to complete this course. Basic nautical knowledge including an understanding of terrestrial and electronic navigation is recommended.

How will the course benefit me?

By providing you with the general features of an ECDIS, its strengths and limitations and hands-on knowledge about the most common features and functionalities all ECDIS have.

How will the course benefit my company?

By improving the officer’s general understanding of an ECDIS as a computer-based navigation system and its role as part of a navigational watch, thus improving the performance and safety of navigation.

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

The course covers the following topics:

- What is psychosocial working environment?
- Characteristics of good and poor psychosocial environment
- Roles and responsibilities
- Prevention

At the beginning of the course you can take a pre-test, where you get the opportunity to show your skills. If you pass the pre-test, you do not have to go through the entire course.

Who is this course for?
This course is aimed at personnel who routinely process personal data, such as IT or HR staff.

Is previous experience required?
You do not need prior knowledge or experience to complete this course. 

How will this course benefit me?
Complying with the GDPR is mandatory for organisations processing personal data in the EU or EEA and for organisations processing the personal data of EU and EEA residents from abroad. This course introduces the principles and rights enshrined in the GDPR and the obligations organisations have to comply with it.  

How will this course benefit my company?
It will ensure you have an awareness of how you and your organisation must comply with the GDPR.

What standards are referred to in this course?
The EU General Data Protection Regulation (GDPR)

Is there an assessment?
Exam in TP with 80% pass mark with two attempts.

Who is the course for?

All crew and personnel who operate and carry out maintenance on deck machinery.

Is previous experience required?

It would be an advantage, however, this course acts as a valuable introduction for personnel that are about to be trained in deck machinery and for those working onshore.

How will the course benefit me?

This course will give learners an awareness of deck machinery, how the equipment is used correctly and safely and how the equipment is maintained.

How will the course benefit my company?

The course will ensure that learners are following best practice as detailed in relevant legislation as well as the company procedures.

What standards are referenced in the course?

• International Safety Management (ISM) Code – safety and pollution prevention, emergency procedures including safe operation of equipment, training, and planned maintenance.

• The International Convention for the Safety of Life at Sea (SOLAS) and Class Requirements

• Code of Safe Working Practices for Merchant Seafarers (COSWP)

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

Any personnel who requires an awareness of the environmental impacts associated with merchant shipping waste and how these wastes can be managed.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide learners with an understanding of the types of waste generated by shipping, how these wastes impact the environment and the methods that can be used to reduce and manage waste.

How will the course benefit my company?

Environmentally aware personnel can help to reduce the environmental impacts of your operations and improve environmental performance.

What standards are referenced in the course?

The European Union (EU) Waste Framework Directive

The International Convention for the Prevention of Pollution from Ships (MARPOL) 1973 - Annex IV

Merchant Shipping (Prevention of Pollution by Sewage and Garbage from Ships) Regulations

Deposits in the Sea (Exemption) Order

Landfill Directive

Environmental Protection (Duty of Care) Regulations

Special/Hazardous Waste Regulations

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

All Maritime personnel.

Is previous experience required?

No prior knowledge or experience is required to complete this course.

How will the course benefit me?

To provide knowledge of Portable Fire Extinguishers

How will the course benefit my company?

To aid in the reduction of fire incidents on vessels.

What standards are referenced in the course?

International Code for Fire Safety Systems (FSS Code)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

This course aims to provide learners with an overview of industry best practice in relation to confined space entry work.

Learning Objectives

- LO1 Explain what is meant by a Confined Space
- LO2 Give examples of Confined Spaces
- LO3 Describe the dangers that can be caused by confined space entry work
- LO4 Identify the legal requirements associated with confined space entry work
- LO5 Explain how to avoid entering confined spaces
- LO6 Explain the importance of having a Safe System of Work in place
- LO7 Describe individual roles and responsibilities involved in Confined Space Entry work
- LO8 Explain the requirements for gas testing
- LO9 Identify acceptable levels for atmospheric test results
- LO10 Give examples of Confined Space Entry site safety equipment
- LO11 Explain the actions to take in an emergency situation
- LO12 Explain Confined Space Entry alarm procedures

Who is the course for?

Any personnel with a desire to improve their ability to establish and maintain high performance standards onboard.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

Assertiveness involves speaking up, challenging others by asking thoughtful questions and taking initiatives when working with others. It constitutes of a confident and self-assured attitude and behavior. This course presents the perfect opportunity for you as a seafarer to be proactive and showcase that you are ready to meet the industry's modern-day demands.

How will the course benefit my company?

Employers are now incorporating seafarer’s soft skills into their crewing decisions. The soft, ‘non-technical skills’ are increasingly important on board due to the rapidly changing workforce and automation of technical tasks. Additionally, maritime accident investigations indicate that a lack of soft skills and human error is the most common reason behind accidents at sea.

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

All trainee Maritime personnel working with fuel systems.

Is previous experience required?

Previous experience is not required to complete this course.

How will the course benefit me?

By providing you with an overview of fuel systems.

How will the course benefit my company?

By providing personnel with an overview of fuel systems.

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?

All seafarers, shipboard or shore-based office personnel who require an introduction to ship stability. 

Is previous experience required?

No previous experience is required. 

How will this course benefit me?

By providing learners with a basic understanding of the principles of ship stability.

How will this course benefit my company?

By increasing company personnel’s awareness and understanding of ship stability and thus decreasing the chance of related incidents.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

This course focuses on prevention of Dropped Objects and employs Samarbeid for Sikkerhet latest revision of the handbook, recommendation 024 (revision 4. 2018) as normative. 

Through increased understanding of the term Dropped Objects, the use of practical tools, aids and methods, the intention is for course participants to be more observant about dropped objects in their daily work. 

This revision was released on the 24.02.20. 

Course content: 

- Dropped Objects tools
- Dropped Objects categories
- Observation techniques 
- Barriers 
- How to improve Dropped Objects findings

Contact details: 

Please contact AAK Energy for more information: 


E-mail:post.aak@nog.no            
Contact person: Inge Køhl

Who is this course for?

Any person conducting an in-service assessment of the competence of an on-oboard candidate.

Is previous experience required?

You do not need prior knowledge or experience to complete this course. 

How will this course benefit me?

The aim of this course is to enable you as an on-board assessor to supervise the training and monitor the competence of seafarers. A seafarer's competence must meet the standards of the STCW Code.

This course is approved by  the Norwegian Maritime Authority (NMA) on behalf of IMO.

This course will be a part of a blended learning in two stages:

- The first stage is this e-learning course

- The second stage will be the on-board workbook

The training will be complete when all the elements of the checklist pertaining to your on-board assessor

How will this course benefit my company?

By ensuring you are qualified and certified as an Onboard Assessor. 

What standards are referred to in this course?

STCW Onboard Assessor (A-I/6)

This course is approved by the Norwegian maritime Authority (NMA)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

This course is a combined training consisting of: Elearning and onboard training (exercises and checklists).

Certificate:

When the training is completed a certificate is issued by the Norwegian Maritime Authority.

The Norwegian Maritime Authority charge an additional fee to issue the formal STCW Certificate.

Who is the course for?

Personnel who require an understanding of major accidents in the maritime industry.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide you with an introduction to major accident hazards.

How will the course benefit my company?

This course will provide personnel with an introduction to major accident hazards and the role that they play in the mitigation of catastrophic events.

What standards are referenced in the course?

Safety and Environmentally Critical Elements (SECE)

ISM Code

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Obligatory working environment training for safety deputies and union officials, completed as e-learning combined with classroom training. 

The course provides basic working environment training in accordance with the main contract between The Norwegian Confederation of Trade Unions (LO) and The Confederation of Norwegian Enterprise (NHO).

Course Content

E-learning

Interactive exercise sequences, video clips, and animations are used to illustrate the topics.

The course provides insight into why HSE work is important, using The Working Environment Act as a tool.

Knowledge of roles and responsibilities in relation to the working environment.

Using systematic methods for improving the working environment and for solving working environment issues.

Classroom Training

This internal company gathering can be conducted and organised by the company itself, or in collaboration with Mintra/The Federation of Norwegian Industries. If you would like Mintra/The Federation of Norwegian Industries to conduct the training, a minimum of 10 people must be enrolled.

If your company would prefer to conduct the training, relating content to internal routines and conditions, Mintra will contribute with documentation and information that describe activities related to this training. 

Contact us to find a suitable implementation model!

Who is the course for?

Engineers.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will the course benefit me?

This course will provide you with an awareness of how a hydraulic system operates.

How will the course benefit my company?

It is intended to provide the knowledge to carry out maintenance of the systems which will help reduce accident.

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

Officers and Crew.

Is previous experience required?

No, but basic maritime engineering knowledge is recommended.

How will the course benefit me?

This course is designed to provide you an understanding of the operation and use of an exhaust gas cleaning system (Scrubbers).

How will the course benefit my company?

The course will provide the learners with basic knowledge about scrubbers and scrubber operations.

What standards are referenced in the course?

• MARPOL Annex VI

• OCIMF guide for Implementation of Sulphur Oxide Exhaust Gas Cleaning Systems

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?

Personnel responsible for cooking, preparing or handing food and others working in the kitchen/galley/dining areas.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course will provide you with an introduction to industry best practice in relation to food safety, health and hygiene.

How will this course benefit my company?

This course will provide personnel with an introduction to industry best practice in relation food safety, health and hygiene and help reinforce the importance of good food safety practices in the workplace.

What standards are referred to in this course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?
Ship's Master and Officers.

Is previous experience required?
You do not need prior knowledge or experience to complete this course.

How will this course benefit me?
This course aims to provide an overall understanding of the requirements of the Maritime Labour Convention (MLC) and the responsibilities of the ship's Master and Officers in relation to achieving, managing and maintaining compliance.

How will this course benefit my company?
By ensuring you have an understanding of the Maritime Labour Convention (MLC) and the resposibilities thereto.

What standards are referred to in this course?
Maritime Labour Convention (MLC2006)

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.